There are a few different ways to remove a Jeep antenna, but the most common is to unscrew it from the base. To do this, first, locate the antenna base (it will be located near the rear of the Jeep) and remove the screws that hold it in place.

 Once the base is free, you can unscrew the antenna from it. Be careful not to lose any wires connecting it to the Jeep! If you need to replace your antenna, find a replacement compatible with your Jeep model. 

You Can Remove The Jeep Antenna With Multiple Options:

Method #1: 

Disconnect the negative battery cable. Remove the antenna cover. Twist each antenna cable clockwise until they come loose from the antenna connector. Lift on the antenna cables and remove the antenna.

Method #2: 

Pry off the antenna cover with a screwdriver. Loosen the screws that hold the dish in place. Slide the dish off of the antenna.

Twist each antenna cable counter-clockwise until they come loose from the antenna connector. Lift on the antenna cables and remove the dish.

Method #3: 

Remove the screws that hold the trim panel at both ends of the windshield. Slide off the panel. Pry off the antenna cover with a screwdriver.

Twist each antenna cable counter-clockwise until they come loose from the antenna connector. Lift on the antenna cables and remove the dish.

Method #4:

 Disconnect the negative battery cable. Remove the splash shield. Remove the screws that hold the trim panel at both ends of the windshield. Slide off the panel.

Pry off the antenna cover with a screwdriver. Twist each antenna cable clockwise until they come loose from the antenna connector. Lift on the antenna cables and remove the dish.

Jeep Wrangler Antenna Base Removal:

You can remove the antenna base on the Jeep Wrangler by removing four screws. Once the screws are removed, you can pull the antenna off its mount.

Jeep wrangler Antenna bases are easy to remove, but there is a complication when replacing them.

Jeep Wrangler Antenna Base Removal:
Source:wranglertjforum.com

There are two types of antenna mounts for the Wrangler, but not all replacements will fit both types. So do find a perfect fit before opening it.

How To Install A Stubby Antenna On A Jeep Wrangler?

If you want to install a stubby antenna on your Jeep Wrangler, there are a few things that you will need before starting:

  1. You will need to find an antenna compatible with your Wrangler.
  2. You will need to find the proper mounting hardware.
  3. You will need to install the antenna.

To find an antenna compatible with your Jeep Wrangler, you will need to look for a model designed specifically for the Jeep.

You can also find antennas compatible with other vehicles. Still, they may not be a perfect fit for the Wrangler.

Installing The Antenna Yourself:

To install an antenna, you must purchase mounting hardware and an antenna. The mounting hardware can be found at most hardware stores, while the antenna can be purchased online or at a specialty store.

To install the antenna, you will need to remove the base of the antenna. You can do this by removing the screws that are located on the bottom of the antenna. Once the screws have been removed, you can tip the antenna off its mount.

Next, you will need to assemble the mounting hardware. The hardware should include a bracket, a screwdriver, and an Allen wrench:

  1. Attach the bracket to one side of the antenna.
  2. Use the screwdriver to tighten the bracket against the antenna.
  3. Attach the other side of the bracket to the screwdriver.
  4. Use the Allen wrench to tighten the bracket against the screwdriver.

Once the hardware has been attached, you can reattach the antenna to its mount by tipping it back onto its mount and tightening the screws.

Alternatively, you can use a wrench to tighten the screws while the antenna is still on its mount.

Now that the antenna has been installed, you will need to find a channel that is compatible with your vehicle.

You can use a channel scanner or an antenna tuner to do this. Once you have found the channel that matches the frequency, you can enjoy it. 

Do You Need To Remove The Jeep Antenna For The Car Wash?

Most car wash systems will not damage a vehicle’s antenna. However, some very high-pressure systems could potentially damage the antenna, so it is always best to remove it before entering the wash.

Some people also like to remove their antennae before taking their Jeep off-roading, as the antenna could get damaged if dragged across the ground.

Ultimately, it is up to each individual to decide whether or not they want to remove their antenna before car washing.

Do You Need To Remove The Jeep Antenna For The Car Wash?
Source:jlwranglerforums.com

The recommendation is, if possible and easy for you to remove the antenna, then indeed remove the antenna. If it is impossible or easy to remove the antenna, leave it on.

A professional repair should be carried out if the antenna is damaged. Always consult your Jeep’s owner’s manual for more information on correctly maintaining and caring for your vehicle.  

How To Remove The Antenna From A Jeep Cherokee?

There is no easy way to remove the antenna from the Jeep Cherokee. It is advisable to take it to a professional to have it removed. Or, you can follow these instructions:

  1. Park the Jeep Cherokee in a well-lit area.
  2. Turn off the engine.
  3. Disconnect the negative battery cable.
  4. Remove the wheel.
  5. Disconnect the antenna wire from the tuner/amplifier unit.
  6. Lift the antenna off of the Jeep Cherokee using a pair of pliers or a wrench. Be careful not to damage it during removal.
  7. Route the antenna wire through the newly-made opening in Step 5 and reattach it to the tuner/amplifier unit with a connector.
  8. Replace the wheel in Step 4 and connect the negative battery cable.
  9. Start the engine and drive the Jeep Cherokee away from the scene. Be sure to disconnect the antenna wire before you leave. Otherwise, you could get a voltage shock when you turn off the engine.

How Do I Replace The Antenna On My Jeep Cherokee?

There are several ways to replace the antenna on a Jeep Cherokee. One way is to remove the old antenna and screw in the new one.

Another way is to remove the old antenna and twist it into the new one. The third way is to remove the old antenna and clip in the new one.

1. Remove The Old Antenna And Screw In The New One

  1. Remove the antenna by unscrewing it from the base.
  2. Install the new antenna by screwing it into the base.
  3. Replace the screw that was removed in step 1.

2. Remove The Old Antenna And Twist In The New One

  1. Remove the antenna by unscrewing it from the base.
  2. Twist the antenna to the desired position and screw it into the base.
  3. Replace the screw that was removed in step 1.

3. Remove The Old Antenna And Clip In The New One

  1. Remove the antenna by unscrewing it from the base.
  2. Clip off one of the arms of the old antenna and attach it to one of the new antenna’s arms. Screw the new antenna into the base.
  3. Replace the screw that was removed in step 1. Be sure to reverse these steps if you originally clipped off one of the arms of the old antenna.

If you have questions about how to replace an antenna on a Jeep Cherokee, don’t hesitate to get in touch with a mechanic or take your vehicle to a dealership for repair.

If you can do it yourself, refer to our instructions above. Do not attempt to replace an antenna on your own if you don’t have basic knowledge of car mechanics. Severe damage could occur if you don’t do it correctly.

In some cases, the antenna may need to be replaced due to physical damage. If your antenna is not working and you cannot fix it yourself, you may need to take your Jeep Cherokee to a mechanic for repair.

Depending on the damage, a mechanic may be able to replace the antenna or may be able to fix the damage and restore the antenna.

Conclusion:

In conclusion, Jeep antennas can be removed in a few simple steps. Once the antenna is free from the vehicle, it can be removed by hand or using a wrench.

Be sure to use caution when removing the antenna as it may be delicate and could easily break.

We have proposed multiple methods to remove antennae safely; you can try them if you have some basic knowledge of technical aspects.

Similar Posts